If you want to buy AMSOIL products, visit the AMSOIL Online Store.
Product Code: TCR
AMSOIL Series 2000 Synthetic 2-Cycle Racing Oil (TCR) is a formulation of carefully selected pure synthetic esters and premium additives, providing excellent performance in both air cooled and water cooled two-cycle motors. AMSOIL TCR is fortified with corrosion inhibitors to prevent rust from condensation at shut down and during off-season storage. The AMSOIL racing formulation is based on extensive research conducted both in-house and in independent laboratories. AMSOIL TCR provides superior lubrication, protection and performance for two-cycle motors in the most demanding applications.
In extreme conditions where operating temperatures are high, two-cycle motors lose power and torque. The aluminum pistons expand from heat and cause an increase in friction. AMSOIL Series 2000 2-Cycle Racing Oil is a special blend of synthetic esters and additives that reduce friction, prevent metal-to-metal contact and provide maximum protection against piston scuffing.
The ASTM D-4863 two-cycle motor lubricity test measures torque output at 350 ºC (662 ºF). Higher torque output means better lubricity and more power. This test is a requirement for NMMA TC-W3 and API TC specifications. As the graph shows, AMSOIL Series 2000 2-Cycle Racing Oil minimizes power loss due to friction.
AMSOIL Series 2000 2-Cycle Racing Oil contains ash-less detergent additives that have been tested and proven to provide superior cleanliness in both air and water-cooled motors. AMSOIL Series 2000 2-Cycle additives inhibit the formation of deposits in the ring grooves, in the combustion chamber and on the exhaust power valves. With AMSOIL Series 2000 2-Cycle Racing Oil rings do not stick and spark plugs do not foul from carbon deposits, and exhaust power valve maintenance is minimized.
Typical Technial Properties |
|
| AMSOIL Series 2000 Synthetic 2-Cycle Oil (TCR) | |
| Kinematic Viscosity @ 100º C, cSt (ASTM D-445) | 7.6 |
| Kinematic Viscosity @ 40º C, cSt (ASTM D-445) | 41.5 |
| Viscosity Index (ASTM D-2270) | 155 |
| Pour Point, ºC (ºF) (ASTM D-97) | -50 (-58) |
| Flash Point, ºC (ºF) (ASTM D-92) | 128 (262) |
| Four Ball Wear @ 40 kgf, 1200 RPM, 75º C, 60 min., avg. scar diameter in mm (ASTM D-4172B) | 0.37 |
| Color | Red |
| Ash Content | Nil |
AMSOIL TCR is fully compatible with TC-W3 lubricants and most other two-cycle oils.
AMSOIL Series 2000 2-Cycle Racing Oil is recommended in air or water-cooled two-cycle motors where NMMA TC-W3, API IC or JASO FC oils are specified. Excellent for both racing and recreational use in snowmobiles, outboard motors, personal watercraft, motorcycles and AIVs. Not recommended for use with nitro-methane or methanol alcohol.
AMSOIL INC. warrants that the use of its lubricants will not cause mechanical damage to mechanically sound equipment when AMSOIL products are used in full compliance with AMSOIL recommendations.
The use of AMSOIL TCR will not void new motor warranties. AMSOIL TCR meets the performance specifications shown above and may be used in two-cycle motors requiring oils meeting the specifications shown.
Maximum performance is attained at a 50:1 mix ratio under both racing and recreational use. Richer mix ratios are not recommended.
Use as packaged in all oil injection systems
50:1 Gasoline-To-Oil Ratio |
|
| Gallons of Gasoline | Ounces of Oil to be Added |
| 1 | 2.5 |
| 2 | 5 |
| 3 | 8 |
| 4 | 10 |
| 5 | 13 |
6 |
15.5 |